Crossing Core E-Rig Kit
The Crossing CORE is an ultra-portable, ultra-powerful, e-nail that is compatible with all Sai Plus and Sequoia coils from Crossing Technology.
The CORE has innovation and style with a top glass water bubbler to cool and filter vapor, and your choice of automatic or manual heating modes. Choose between 4 preset heat levels or hold the button to heat the atomizer manually. Crisp LED indicator lights and haptic feedback (vibration notifications) will keep you informed, and the 60 second cycle timer, or manual 15 second cycle timer will keep you and your material safe! The directional airflow carb cap helps control the airflow and allows you to easily move your material around while you're using your CORE, making sure that the material is perfectly, evenly heated, and preventing any waste!
Key Features:
Quick heating. The Core reaches the highest temp in 13 seconds
Portable, travel friendly size and shape
Convenient Travel Casing
Sai Plus/Sequoia Coil Compatibility
Water Bubbler for Cool, Filtered Vapor
Directional Glass Carb Cap for Airflow Control
4 Preset Temperatures or Manual Temperature Control
Automatic Shutoff Timer 60 or 15 Seconds
Haptic Feedback (vibrations) and LED Indicator Lights
*Large 3000Mah Built In Battery (lasts approximately 30 full sessions)
USB-C Charging
Silicone Cover for a Protected Heater Base (Now comes in black instead of silver)
Single Button Control
Using the Core:
The CORE is powered on by pressing the button 5 times in quick succession. The LED lights will indicate the remaining charge.
(Green for full, White for medium, Blue for low, and Red for very low.)
Heat Settings:
Change the heat setting by pressing the button 3 times. LED lights will then indicate the temperatures.
Green for high
White for medium/high
Blue for medium
Red for low
Temperatures:
Quartz Bucket:
Green-575 Degrees / White 425 Degrees
Titanium Bucket
Green-600 Degrees / White 575 Degrees
Triple Titanium Bucket
Blue-750 Degrees / Red 700 Degrees
Once an appropriate temperature has been selected for your coil, you're good to go! Press and hold the button to manually heat the atomizer for up to 15 seconds or press the button twice to start an automatic heating cycle instead. In automatic heating cycles the CORE will preheat and then vibrate when it's ready to use!
Included Items in Core Kit:
The CORE E-Nail
Glass Water Bubbler
Carp Cap with Tether
Triple Titanium with Black Ceramic Coil (pre-installed)
Titanium Bucket coil
Quartz Bucket Coil
5 Q-Tips
2 Alcohol Pads
1 Silicone Storage Container
1 Loading Tool
1 USB-C Charging Cable
1 Power Adapter (USA Style Plug)
2 O-Rings
1 Travel Case with Foam
1 Protective Black Silicone Cover for Heating Base
User Manual
How to clean:
Use cotton swabs to clean the Quartz bucket or Titanium bucket each session. Clean the CORE base and air pathway when maintenance is required.
Simply soak the whole coil in a cup with ISO and dry the coil before use. The bucket needs to be taken out when cleaning the Quartz Bucket or Titanium Bucket coil.
Charging:
- Plug the USB-C cable into the charging port and connect to the provided charging brick for fast charge, it requires approximately 1 hour 45 minutes to fully charge.
- Light will flash red while charging and solid red when done.